PinballZone.com Garage Sale 2005
All items are PICK-UP ONLY in Quakertown, PA (30 minutes from Allentown, PA - 1 hour from Philadelphia). ABSOLUTELY POSITIVELY NO SHIPPING!
All items CAN be delivered for free to the ALLENTOWN PINBALL SHOW. Other delivery MAY BE AVAILABLE for an additional fee. E-Mail for details.
All items are as-is, no additional pictures are available.
I will NOT part-out any items.
I WANT THIS STUFF OUT OF MY GARAGE! FEEL FREE TO MAKE AN OFFER ON ANY ITEM(S)!!!
If you are interested in any item, contact me at 
or click here.
Star Trek: TNG Pinball Lower Cabinet - $175
Includes transformer (assumed to be working), playfield prop rod, interface board, some wiring, "To Be Continued" switch/button, parts of tilt mech.
Details: No visible sun-fade, cabinet NOT drilled for coin-door lock bar, duct tape residue near right-hand flipper button, minor scratches (nothing major at all), minor chipping but not in visible areas (under leg bolt area, under head), rails have minor scratches and dents. Should be beautiful when cleaned up.
http://www.pinballzone.com/garagesale/stcab01.jpg
http://www.pinballzone.com/garagesale/stcab02.jpg
http://www.pinballzone.com/garagesale/stcab03.jpg
http://www.pinballzone.com/garagesale/stcab04.jpg
http://www.pinballzone.com/garagesale/stcab05.jpg
http://www.pinballzone.com/garagesale/stcab06.jpg
http://www.pinballzone.com/garagesale/stcab07.jpg
http://www.pinballzone.com/garagesale/stcab08.jpg
http://www.pinballzone.com/garagesale/stcab09.jpg
http://www.pinballzone.com/garagesale/stcab10.jpg
http://www.pinballzone.com/garagesale/stcab11.jpg
http://www.pinballzone.com/garagesale/stcab12.jpg
Mr. Do Cabinet (NOT dedicated) - $20
... with working ORIGINAL boardset - $80
Details: Monitor does not work, appears to be a wiring issue that FRIED THE MONITOR, monitor is connected without the ground isolation transformer, I've seen this happen before, in my experience this blows a fuse or traces on the board (but it could be worse, who knows). This is the way I got it, have not tested further. PCB/Boardset NOT CURRENTLY available separately.
http://www.pinballzone.com/garagesale/mrdo1.jpg
http://www.pinballzone.com/garagesale/mrdo2.jpg
http://www.pinballzone.com/garagesale/mrdo3.jpg
http://www.pinballzone.com/garagesale/mrdo4.jpg
http://www.pinballzone.com/garagesale/mrdo5.jpg
http://www.pinballzone.com/garagesale/mrdo6.jpg
http://www.pinballzone.com/garagesale/mrdo7.jpg
http://www.pinballzone.com/garagesale/mrdo8.jpg
Ms. Pac Man Cabinet (NOT dedicated) - $40
... with working BOOTLEG boardset - $120
Details: Monitor works, has seriously bad burn, probably could use a cap-kit too. Bootleg/clone boardset is single layer (not sandwich) and much smaller than a real Pac PCB. Boardset NOT available separately.
http://www.pinballzone.com/garagesale/mspc1.jpg
http://www.pinballzone.com/garagesale/mspc2.jpg
http://www.pinballzone.com/garagesale/mspc3.jpg
http://www.pinballzone.com/garagesale/mspc4.jpg
http://www.pinballzone.com/garagesale/mspc5.jpg
Donkey Kong 3 Control Panel - $20
Details: Joystick appears to work, missing button, good condition but dirty, should clean up OK.
http://www.pinballzone.com/garagesale/dk3cp1.jpg
http://www.pinballzone.com/garagesale/dk3cp2.jpg
Pac-Man or Bally/Midway Coin Door - *SOLD!*
Details: OK condition, dirty and a little rusty, no coin mechs, could use paint. No apparent bends or dings.
http://www.pinballzone.com/garagesale/pacdoor1.jpg
http://www.pinballzone.com/garagesale/pacdoor2.jpg